www.vintenradamec.comFusion FH-145Fusion FHR-145 Pan and Tilt HeadPart Nos. V4101-0001V4102-0001Installation GuideFusion FH/FHR-145 Pan and Tilt Head
HD Tripod Mounting OptionsInstallationUsing a 5/64" Allen key, attach the Mitchell key to the head base with two 6-32 UNC screws, then use a 5/16
FH/FHR-145 Pan and Tilt HeadInstallationAdjusting the Camera CradleThe FH-145/FHR-145 The maximum payload is 65 kg (145 lb). mounting plate.is deliver
10FHR-35 Robotic Pan and Tilt HeadInstallationAdjusting the Camera CradleInstallation Guide2. Adjusting the mounting plate(B) Stepped adjustment – Ad
FH/FHR-145 Pan and Tilt HeadMounting the Camera1.2. Apply the tilt lock. Using a 5 mm Allen key, remove the three centre screws securing the camera cr
12InstallationIf the camera cradle stops in a horizontal position (camera pointing directly forward), the balance is correct.Setting the Fore/Aft Bala
FH/FHR-145 Pan and Tilt HeadInstallationBalancing the Head4. Tighten the bolts securing the camera to the cradle and recheck the horizontal balance. R
14InstallationBalancing the HeadElectrical ConnectionsIf the camera moves back towards the horizontal position when released, the payload is mounted t
Cable ManagementTo ensure a safe and tidy installation, all cables connected to the head should be dressed and secured using the cable manage-ment bra
Regular ChecksRoutine UseDuring use, check the following regularly:Once a month check the balance of the camera and payload and adjust if necessary. C
TroubleshootingFaultCheckActionPower supplied, but the camera cradle is not moving.Check that the tilt lock is disengaged.See Locking/Unlocking the Ca
Original Instructions: EnglishCopyright © 2012All rights reserved throughout the world. No part of this document may be stored in a retrieval system,
FH/FHR-145 Pan and Tilt HeadGeneral Notices18Mounting supports and adaptorsVinten HD Quickfix adaptor . . . . . . . . . . . . . . . . . . . . . . 349
FH/FHR-145 Pan and Tilt HeadGeneral NoticesComplianceInstallation GuideGeneral Purpose Connector (GP I/O)Declaration of Conformity Limited declares th
20FH/FHR-145 Pan and Tilt HeadGeneral NoticesComplianceInstallation GuideRoHS Compliance StatementVitec Videocom Limited is compliant with the Europea
Publication No. V4101-4980/1Vinten RadamecA Vitec Group brand
FH/FHR-145 Pan and Tilt HeadContentsComponents and Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2Installation GuideSafety and WarningsFollow all warnings and instructions marked on the product and in this manual. Safety warnings are included in t
FH/FHR-145 Pan and Tilt HeadSafety and WarningsIn most installations, the teleprompter (if installed) is mounted onto the head and protrudes the furth
FH/FHR-145 Pan and Tilt HeadRear View11 . . . . . . . . . . . . . . . . . . . . . Serial connectors (Lens, GP I/O)12. . . . . . . . . . . . . . . . .
FH/FHR-145 Pan and Tilt HeadBox Contents and Tools RequiredInstallationBox contentsFH-145/FHR-145 pan and tilt head6 . . . . . . . . . . . . . . . . .
InstallationMounting Supports and AdaptorsITEMNO.MOUNTING SUPPORT OR ADAPTORPART NO.MOUNT1Vinten HD Quickfix® Adaptor 3490-3Vinten HD tripods2Mitchell
InstallationHD Tripod Mounting OptionsThe FH-145/FHR-145 pan and tilt head can be mounted onto the following heavy-duty (HD) tripods:Ÿ Vinten HDT-1 si
Comments to this Manuals