Vinten-radamec Fusion FHR-120 User Manual

Operators Guidewww.vintenradamec.comFusion FHR-120Robotic Pan and Tilt HeadsFusion FHR-120 Robotic Pan and Tilt HeadsPart Nos. V4030-0003V4036-0001

Fusion FHR-120 robotic pan and tilt heads8Technical dataPhysical dataWeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operators guide9ContentsPageSafety – read this first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Safe

Fusion FHR-120 robotic pan and tilt heads10Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operators guide11Components and connections[1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Camera cradle with camera m

Fusion FHR-120 robotic pan and tilt heads12[6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operators guide13[14] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Four-hole mounting plate with Quickfix® base[15] . . . . .

Fusion FHR-120 robotic pan and tilt heads14Introduction and descriptionThis operators guide covers the FHR-120 and FHR-120 VR robotic pan and tilt hea

Operators guide15Installation Installing the head and payload1. Unpack and check the head for any signs of damage (see Unpacking the head on page 15).

Fusion FHR-120 robotic pan and tilt heads16AccessoriesThe head is supplied with standard accessories (Fig. 4) used when mounting the head onto a tripo

Operators guide17Mounting the head onto a Quickfix® adaptorIn situations where heads are often interchanged on pedestals and tripods, it is recommende

Fusion FHR-120 robotic pan and tilt heads182. Position the head in the adaptor, ensuring that it seats correctly in the recess and the safety button i

Operators guide19Mounting the payloadWhen the camera is installed, the remaining payload, including viewfinder and teleprompter, can be attached to th

Fusion FHR-120 robotic pan and tilt heads20Electrical connectionsCablingAll external ports are located at the back of the head (see Fig. 2 on page 12)

Operators guide21The pedestal/height drive power box has two power output sockets and a single power inlet socket that is connected to the studio powe

Fusion FHR-120 robotic pan and tilt heads22Each power connector on the height drive is fitted with a retaining clip to prevent the cable becoming disl

Operators guide23USB connectionThe Vinten Radamec Fusion Setup and Test software tool is used to configure and set the pan and tilt limits of the head

Fusion FHR-120 robotic pan and tilt heads242. Hold and steady the camera cradle, then disengage the tilt lock [5]. Carefully release the camera cradle

Operators guide254. After adjusting the C of G height it may be necessary to check that the fore and aft balance remains satisfactory. Readjust the po

Fusion FHR-120 robotic pan and tilt heads26ConfigurationSetting the pan and tilt movement limitsWhen the head is first installed—and periodically ther

Operators guide27 7. In the Robot Type section (a), select Head.8. In the Machine Version section (b), select the options for the installed head. The

Fusion FHR-120Robotic Pan and Tilt HeadsOperators Guide

Fusion FHR-120 robotic pan and tilt heads2810. Click the Set Pan, Tilt X/Y and Height Limits button (d) to set the limits for the pan and tilt axes. T

Operators guide29OperationPowering upWhen the system is ready, ensure that all external cable connections are complete and the tilt lock [5] is diseng

Fusion FHR-120 robotic pan and tilt heads30To engage the tilt lock, proceed as follows:1. Steady and hold the camera cradle [1] in the horizontal posi

Operators guide31Fig. 16 Controlling tilt movements using the joystickMove joystick backward to tilt the camera upwardMove joystick forward to tilt t

Fusion FHR-120 robotic pan and tilt heads32Maintenance Checking the balanceIt is recommended that the balance of the head is checked at least once a m

Operators guide33Changing a fuse1. Switch OFF power to the head [13].2. Carefully insert a small, blunt screwdriver or similar tool into the side of t

Fusion FHR-120 robotic pan and tilt heads34Troubleshooting Fault Check SeePower supplied, but the camera cradle is not moving.Check that the camera cr

Operators guide35Parts listThe following lists include main assemblies, user-replaceable spares and optional accessories. For further information rega

Fusion FHR-120 robotic pan and tilt heads36

Publication Part No. V4030-4980Issue 2November 2011Published byVitec Group Videocom DivisionTechnical Publications DepartmentWilliam Vinten BuildingWe

BRAZILVitec Group BrazilVitec Brazil Tecnologias Ltda.Rua Quintana, 950 – cj.32Brooklin São Paulo, 04569-011Brazil Tel. +55 11 5102 4001Fax +55 11 51

Operators guide3Safety – read this firstUnderstanding these instructionsEnglishThe original instructions presented in this operators guide were writte

Fusion FHR-120 robotic pan and tilt heads4LietuviųŠiame operatoriaus vadove pristatomos pirminės instrukcijos parašytos anglų kalba ir vėliau išversto

Operators guide5Safety instructionsPlease read this Operators Guide carefully before attempting to operate the product. Retain this guide for future r

Fusion FHR-120 robotic pan and tilt heads6Warning symbolsWARNING! Where there is a risk of personal injury or injury to others, comments appear suppor

Operators guide7Declaration of ConformityIn respect of the following equipment manufactured by Camera Dynamics Limited: in accordance with the followi