Camera Control UnitCCURobotic Camera Control SystemsVintenRADAMECBROADCAST ROBOTICSOperators GuideV4079-4980 Issue 1.0
viiFeatures and ControlsPower ON/OFF switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1Installation InstructionsOut of the boxBefore unpacking the Fusion CCU, always inspect the shipping container for evidence of damage and report any d
2Connecting to CameraCameras can be connected to the Fusion CCU using either a RS-232 or RS-422 cable. If the camera is connected using a RS-232 cable
3OperationThe Camera Control Unit (Fusion CCU) is designed to remotely control camera functions, typically camera iris, shutter speed, black level, ga
47. At the prompt type “Y” then press the ENTER key. Proceed following the Hyper terminal prompts and change the channel address as required. The Loca
5Adding a new ChannelFusion CCU models V4079-0001 (1 channel) and V4079-0003 (3 channel) can be upgraded at any time to include additional channels. E
6MaintenanceRoutine checksDuring use, check the following:• Check that both PSU 1 and PSU 2 LEDS are illuminated. • Check all cables are secur
7TroubleshootingFault Check ReadPower supplied but Fusion CCU not working.Check that the power cable is correctly seated and secure. Check that the Fu
8Parts ListPart NumberMain assembliesFusion CCU single channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FusionCamera Control UnitOperators GuidePublication Part No. V4079-4980Issue 1.0
www.vintenradamec.comVintenRADAMECBROADCAST ROBOTICSCamera Control UnitPublication Part No. V4079-4980Issue 1.0CHINAThe Vitec Group plc ChinaRm 706, T
Copyright © Vitec Group plc 2009All rights reserved throughout the world. No part of this document may be stored in a retrieval system. transmitted, c
iContentsEuropean Union Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iiiSafety Guidelines . . . . . . .
iiiEuropean Union RegulationsEnglishThe original instructions presented in this operators guide were written in English, and subsequently translated i
ivDisposing of old electronic equipmentThis symbol on the product or on its packaging indicates that this product must not be treated as household was
vSafety GuidelinesPlease read this manual carefully before attempting to operate the product. Retain this operators guide for future reference. Safety
viTechnical DataWeight.................. 2 kg (4.4 lbs)Height ..........
Comments to this Manuals